Skip to main content
foodservicenerd
Mop Sink

Advance Tabco 9-OPC-84DL — Floor Mop Sink, 23"W x 20"D, 18-ga 304 stainless

Specs & image © Advance Tabco. Independent reference — verify on the spec sheet.
Dimensions
8" deep × 23" long × 84" high
Advance Tabco 9-OPC-84DL — Mop Sink, 8"W x 23"D, 18-ga stainless steel

The Advance Tabco 9-OPC-84DL is a floor-mount commercial mop sink measuring 23″×20″, built from 18-gauge 304 stainless. The bowl is 16″×20″ and 12″ deep — size it to your mop bucket. It sits low on the floor so a heavy mop bucket is easy to fill and dump. A bucket/mop hook is included. The 304 alloy resists corrosion from constant water and cleaning chemicals. It is NSF listed.

Specifications

SpecDetail
MountFloor-mount
Bowl width16"
Bowl front-to-back20"
Bowl depth12"
Overall width23"
Overall depth20"
Overall height84"
MaterialStainless steel
Stainless gradeType 304 stainless
Gauge18 gauge
Faucet included—
Mop / bucket hookYes
Wall guardsNo
Drain size2"
NSF listedYes
Warranty—

A dash (—) means the manufacturer has not published that specification.

Pulled from Advance Tabco · spec sheet (PDF) ↗

Shipping & handling

Freight (LTL) — ships palletized with curbside/dock delivery (based on its 390.0 lb weight). Factor freight into landed cost; many brands waive it above an order minimum.

Ships byFreight (LTL)
Product weightNot published
Shipping weight390.0 lb
Shipping dimensionsNot published

Related equipment

What to check when buying compartment sinks

Match compartment count and drainboards to your wash-rinse-sanitize and code needs.

Try the Water heater sizing calculator →
Published by Resultex Media Group LLC · Independent & vendor-neutral · Educational only, not legal or engineering advice · Last verified September 2026